Your position: Home / Over-Ear & On-Ear

Mixcder Shareme 5 Foldable Wireless Headphones

ShareMe 5
• Brilliant ShareMe Technology
• Up to 18-Hour Music Playtime
• Immersive Hi-Fi Sound
• Remote Control
Price:
USD
$47.99
$96.00
SKU:
ShareMe 5
    Please select the information you wantX
Quantity:
-
+
(500 Units available)
  • Description
  • Highlights
  • Spec
  • Download
  • FAQ
  • Super Reviews
  • Reviews(4)
Features:

Brilliant ShareMe Technology:
Two ShareMe-equipped headphones could be paired with the same Bluetooth device, which enables two of you to listen to the same music or other audio sources at the same time 

Up to 18-Hour Music Playtime:
Enjoy up to 18 hours of wireless music playback or a 3 month standby time after 2 hours of charging; connect via the included 3.5 mm cable to play music when the battery finally runs out 

Immersive Hi-Fi Sound:
Shareme5 equipped with 40mm large-aperture drivers, professional ear pad made of protein and memory foam cups, which make you enjoy the deep, powerful, clear and balanced sound 

Remote Control:
Equipped with a CVC 6.0 noisecancelling microphone for crisp, clear phone call quality, the headset allows you to adjust the volume, change the track, and play and pause the music via the on-ear controls 


Notes:
1. It is strongly recommended fully charging for the first use.
2. Playtime varies according to volume level and audio content.
3. The microphone can't work when used as a wired headphone.
4. There will be an alert tone when the volume reaches the maximum level.


What's in the box

1. Mixcder ShareMe5  2. 3.5MM Audio Cable  3. Micro USB Charging Cable  4. User Manual
Microphone    
Microphone Unit: Φ4.0*1.5mm
Directivity: Omni-directional
S.P.L: -42dB±3dB
Operation Voltage: 1-10V
Impedance: ≤2.2 kΩ

Speaker    
Speaker Diameter: Φ40mm
Impedance: 32Ω±15%
S.P.L: 95dB±3dB
THD: <3%
Frequency Response: 20Hz-20,000Hz

Bluetooth    
Bluetooth Version: 4.1
Bluetooth Distance: 15m/49ft (indoor); 7m/23ft (outdoor)
Transmission Range(Hz): 2.402GHz-2.48GHz
Support Profile: HSP/HFP/A2DP/AVRCP
Pairing Name: Mixcder ShareMe5

Battery    
Battery Type: Built-in 400mAh rechargeable lithium battery
Charging Port: Micro USB 
Running Time: About 18-hour talking time/About 18-hour music playing time
Charging Time: About 2 hours
Operating Temperature:    -10℃-50℃

Package Info
Item Weight:206g
Boxed-product Weight: 462g
Dimension: 8*6.4*3.3 in/ 20.5*16.2*8.4cm
1. Why the headphone cannot be powered on?
The headphone may be out of power. Please recharge it and try again.
Note: It takes about 2 hours for a full charge. When it is fully charged, the red LED light turns off.

2. Do I need to charge the headphone if I want to use the 3.5mm audio cable?
There is no need to charge the headphone if you want to use the 3.5mm audio cable. This is the wired mode of this headphone.

3. Do these headphones work 
with TV?
1. If the TV is with Bluetooth, the headphones work well with TV.
2. If your TV isn’t with Bluetooth, then you are going to need a Bluetooth transmitter like Mixcder TR007 or TR008.
Note: If your TV or Bluetooth transmitter is with aptX Low Latency technology, you can enjoy perfect synchronization with audio and video for gaming and multimedia applications.

4. Why the headphone can’t be paired with the mobile phone?
Please check as below:
1. Please check that the headphone is on a full charge.
2. Please make sure that the mobile phone's Wireless function is on. You can clear all connection history on your phone.
3. Please make sure other paired device’s wireless function is turned off.
4. Please make sure the two devices are in the effective pairing range. (33 feet/10 meters).
5. Please make sure that there is no obstacle between the headphone and the mobile phone, such as electronic equipment and a wall.
6. Furthermore, make sure that the headphone is in pairing mode, and pair it with your phone again.

5. How to extend the 
life span of my headphone?
1. Store the earphone with power off and in a dry environment.
2. If you don't use the earphone for a long period, charging the battery every 2 months for 1-2 hours.
3. Don't charge the battery beyond the rating.
4. Keep the temperature at 0℃-40℃ during charging.
5. Don't put the earphone on combustible substances (bed and carpet) during charging.
6. Don't disassemble and replace the built-in battery on your own, which will damage the headphone.
7. Use a dry cloth to clean it if needed.
8. Avoid dropping the headphone from high places or on hard surfaces.
9. Avoid exposing the headphone to extreme temperature. (Recommended Storage temperature is -40℃-70℃.)

6. Do these speakers have volume, bass and treble controls?
No, It just has a volume control.

7. Can ShareMe5 pair with headphones from other brands?
No, it can only pair with Mixcdershareme headphones.

8. How to pair two Shareme headphones?
Steps are listed below:
1. Make sure the headphones and the connected Bluetooth-enabled device are off.
2. Do not place all devices more than one meter away from each other.
3. Press and hold the power buttons located on each of headphones for 8-10 seconds until the LED flashes blue and red alternately, which means pairing mode.
4. Two headphones will pair to each other automatically. Once successfully paired, one headphone voices “Connected, left channel” and the LED flashes blue and red alternately, which means the primary headphone. The other headphone voices “Connected, right channel” and the LED turns to solid blue, which means secondary headphone.
5. Turn on the Bluetooth function of the device and select the “Mixcder ShareMe 7” to pair the primary headphone.
6. Once successfully paired, the LED turns to solid blue. You will hear “Second device connected”.

9. How to disconnect two paired 
shareme headphones?
Please follow the instructions below:
1. Please clear the device (headphone) from your phone and computer that you connected before. Please make sure that your headphone disconnects with it before you start pairing your headphone with other devices. Please turn off both headphones
2. Press and hold one headphone's power button till the indicator light flashes red and blue alternatively (in pairing mode).
3. Afterward, you can start to pair one of 
your 
shareme headphones with your new device. When it pairs with your new device successfully, you can pair another headphone with other devices.
 
Average rating: 5.0 based on 4 reviews
Share your thoughts with other customers
Write a review